BLACKOUT ELECTROSTATIC CAR WINDOW FILM, 6%, 70X150CM

Enhance the look of your car with this tinting film. Car window tinting has never been easier thanks to this set. Darken your car windows to the desired shade. Solar film not only keeps the heat out but also provides protection from unwanted eyes. Protect your belongings and increase your privacy in an easy way. This electrostatic film differs from the adhesive film in that it can be removed very easily.



Properties:

- Sun protection film / blackout film

- Electrostatic

- Scratch resistant

- Easy to apply and remove

- Black

- 6% light transmittance

- 1 roll of: 70 x 150 cm

-
Includes spatula and knife


How to start:

1. Clean and grease the window, use: Glass cleaner, glass cleaner or Vitro-car cleaner (META 70-50)

2. Cut or trim the window film to size. Tip: Make sure the film is 3 to 5 cm larger than the window.

3. Moisten the window with (soapy) water
.
4. Remove the transparent layer from the film

5. Place the film with the adhesive layer on the wetted surface and slide the film in the right place
.
6. Press the foil and use the spatula to fix the foil

7. Dry the foil

8. Cut off the excess foil with the knife

9. Using the spatula, rub all air bubbles and water out of the foil (from inside to outside)

10. Done!