Increase your privacy and comfort

With this blackout window film for cars, you can easily enhance the privacy and comfort in your vehicle. The film allows only 22% of light through, protecting your interior from prying eyes and excessive solar heat.

Easy installation

The self-adhesive film is designed for quick and easy installation. Thanks to the included squeegee and knife, you can precisely cut and apply the film without air bubbles.

Durable quality

This window film is scratch-resistant and retains its color and effectiveness for a long time. The black tint provides a stylish look that suits any vehicle.

Specifications

• Light transmission: 22%
• Dimensions:
• 1 roll of 76 x 152 cm
• 1 roll of 51 x 152 cm
• Color: Black
• Material: Self-adhesive, scratch-resistant film
• Includes: Squeegee and knife for installation

Installation instructions

1. Clean the windows: Make sure the car windows are clean and grease-free.
2. Cut the film to size: Measure the windows and cut the film with an extra margin of 3 to 5 cm.
3. Moisten the window: Spray a mixture of water and a little dish soap on the window.
4. Remove the protective layer: Peel off the transparent layer from the film.
5. Apply the film: Place the film on the wet window and position it correctly.
6. Remove air bubbles: Use the squeegee to push water and air bubbles to the edges.
7. Trim excess film: Use the knife to trim off excess film along the edges.
8. Let dry: Allow the film to dry thoroughly for optimal results.

With this blackout window film, you not only give your car an aesthetic upgrade, but you also increase privacy and driving comfort.