Effective protection against marten damage

Martens can cause significant damage to cars by biting through cables and other components. The T.E.G. M208 marten repeller offers an effective solution by emitting ultrasonic sounds that martens find extremely unpleasant, causing them to avoid your vehicle.

Ultrasonic technology

This marten repeller produces high-pitched tones with a frequency of about 22.5 kHz and a sound pressure of approximately 115 dB. These sounds are inaudible to humans but work effectively to keep martens, rats, and raccoons at bay. The built-in speaker has a 140-degree cone, ensuring wide coverage under the hood.

Easy installation

The T.E.G. M208 is designed for easy installation in your car's engine compartment. With just two wires, you connect the device to your vehicle's 12V power supply. The module features a 'soft start' function, so the car's onboard computer is not affected. Additionally, the device is protected against voltage spikes from the alternator up to 40V and 20ms.

Low energy consumption

With an average current consumption of less than 2 mA, the marten repeller puts minimal load on your car's battery. This makes the device suitable for long-term use without worrying about battery life.

Visual status indication

A built-in LED indicator blinks slowly to show that the device is working correctly. This allows you to easily check if the marten repeller is active and protecting your car.

Specifications

• Power supply voltage: 11-15 V/DC
• Average current consumption: < 2 mA
• Frequency: approx. 22.5 kHz
• Sound pressure: approx. 115 dB (+/- 25%)
• Emission angle: 140° cone
• Dimensions: 72 x 50 x 28 mm (without mounting flange)

Application possibilities

Although the T.E.G. M208 is primarily designed for use in cars, the device can also be used in other environments where martens cause problems, such as attics or carports. Please note that the device must be installed in a dry place and should not be exposed directly to water or moisture.

Compatibility with 24V systems

If you want to use the device in vehicles with a 24V system, such as trucks, a converter (model M038) is required to reduce the voltage to the necessary level for the marten repeller.

With the T.E.G. M208 marten repeller, you effectively protect your car against unwanted marten visits and the damage they can cause.