Powerful two-component epoxy adhesive

The FINIXA PLI 50 is a high-quality two-component epoxy adhesive, specially developed for bonding metal panels. This adhesive offers an excellent alternative to traditional welding methods and is suitable for both identical and different materials.

Versatile applications

With the PLI 50, you can firmly bond various panels together. Applications include:

• Replacing roof panels
• Attaching aluminum door panels to steel door frames
• Mounting rear wings

Excellent properties

This epoxy adhesive stands out for:

• Curing at room temperature, with the option for heat acceleration
• Long open time of 60 minutes at 23°C
• Workable within 4 hours and fully cured within 24 hours
• Excellent corrosion protection
• Spot weldable in uncured state

Ease of use

The PLI 50 comes in a 220 ml cartridge and is easy to use with the PLI 60 bonding gun. For optimal performance, it is recommended to use extra mixer tips (PLI 55).

Technical specifications

• Color: Black
• Content: 220 ml
• Open time: 60 minutes at 23°C
• Full cure: 24 hours at 23°C
• Resistant to oven temperatures up to 230°C
• Paintable after 24 hours

Application instructions

1. Surface preparation : Ensure all surfaces are clean, dry, and free of grease and dust.
2. Insert cartridge : Place the cartridge in a suitable two-reservoir epoxy gun.
3. Mixing : Dispense a small amount to thoroughly mix the components.
4. Application : Apply the mixed adhesive to one or both surfaces.
5. Clamping : Secure the bonded parts to ensure good adhesion during the curing process.
6. Curing : Allow the adhesive to cure according to the indicated times for optimal strength.

With the FINIXA PLI 50 metal bonding, you choose a reliable and efficient solution for bonding metal panels in various applications.