Essential hardener for Gelson Side Scudex

The GELSON Side Scudex Hardener 125 grams is specially developed to be mixed with the Gelson Side Scudex coating. This combination provides a robust and elastic protective layer on your car's bodywork.

Optimal mixing ratio for maximum performance

For the best result, mix the hardener with the Side Scudex in a ratio of 3:1. This means three parts Side Scudex to one part hardener. This ratio guarantees optimal curing and durability of the protective layer.

Areas of application

• Underside of the car : Provides protection against stone chips and corrosion.
• Sills and spoilers : Increases resistance to external influences.
• Inner panels : Offers extra sound dampening and protection.

Benefits of the GELSON Side Scudex Hardener

• Elastic protective layer : Prevents cracking and splitting due to temperature fluctuations.
• Excellent adhesion : Adheres directly to bare metal or fiberglass without primer.
• Fast drying : Reduces waiting time between application and further finishing.

Instructions for use

1. Preparation : Make sure the surface is clean, dry, and free of grease.
2. Mixing : Combine three parts Side Scudex with one part hardener and mix thoroughly.
3. Application : Apply the mixture with a spray gun or brush, depending on the desired finish.
4. Drying time : Let the product dry for 4 to 6 hours for optimal curing.

Recommendations for use

• Primer : For galvanized or aluminum surfaces, the use of an epoxy primer is recommended for better adhesion.
• Thickness : A minimum layer thickness of 150 to 200 microns is advised for effective protection.

With the GELSON Side Scudex Hardener, you are assured of durable and effective protection for your car against various external influences.