Excellent adhesion and corrosion protection

The ROBERLO Multyfiller Plus Z1 is a light grey 2-component primer that ensures strong adhesion to various surfaces. Thanks to its anti-corrosive pigments, this primer provides effective protection against rust, which is essential for durable bodywork repair.

High filling power and smooth finish

With a filling capacity of 150 microns in two coats, the Multyfiller Plus Z1 effortlessly levels out imperfections. This results in a smooth surface ready for further finishing, contributing to a professional appearance of the final result.

• Filling capacity: 150 microns (2 coats)
• Coverage: 10 m² per litre

Flexible application and mixing ratio

This primer is suitable for various applications and can easily be adjusted to specific needs. By adding 10% S322 thinner, the primer can be used as a base coat, increasing its versatility.

• Mixing ratio: 4:1 with hardener F
• Available hardeners: F500 (standard) and F600 (fast)

Easy sanding and repainting

The Multyfiller Plus Z1 can be sanded both dry and wet, speeding up the preparation process. After curing, the primer is easy to repaint, allowing you to quickly proceed with the next steps in the painting process.

• Sandability: dry and wet
• Repaintable after curing

Application instructions

For optimal results, follow these steps:

1. Sand the surface with P240 grit.
2. Clean and degrease with DA93.
3. Mix the primer with hardener in a 4:1 ratio.
4. Apply with a 2 mm spray nozzle.
5. Sand after drying with P360 to P600 grit.

With ROBERLO Multyfiller Plus Z1, you choose a reliable base that contributes to a high-quality finish for bodywork repair projects.