loader
MPM
MPM ENGINE OIL 0W-30 PREMIUM SYNTHETIC PC 1L FOR OPTIMAL ENGINE PERFORMANCE
MPM 05001PC

Fully synthetic 'Low SAPS' engine oil, ideal for petrol and diesel engines with exhaust aftertreatment systems.

20,16
In stock. Delivery in 1 day

Do you have a question about MPM Engine Oil 0W-30 Premium Synthetic PC 1L for optimal engine performance ?

MPM Motorolie 0w-30 Premium Synthetic Pc, 1l

High-quality engine oil for modern engines

MPM Engine Oil 0W-30 Premium Synthetic PC is a fully synthetic 'Low SAPS' engine oil, specially developed for both petrol and diesel engines equipped with an exhaust aftertreatment system. This oil provides excellent protection and performance for your vehicle.

Suitable for extended oil change intervals

Thanks to its advanced formulation, this engine oil is extremely suitable for extended oil change intervals. It takes into account the use of bio-components in the fuel, contributing to a more efficient and environmentally friendly operation of the engine.

Fuel savings and start-stop technology

The excellent fluidity at low temperatures, combined with support for start-stop technology, results in a fuel saving of 4.2% compared to a 5W-40 reference oil. This means you not only save on fuel costs, but also contribute to lower CO₂ emissions.

Specifically recommended for PSA Euro VI Blue HDi DW10F engines

This engine oil is mandatory for PSA Euro VI Blue HDi DW10F engines. Using the correct oil is essential for maintaining the performance and lifespan of your engine.

Meets international specifications

MPM Engine Oil 0W-30 Premium Synthetic PC meets the following specifications:

  • ACEA C2
  • Fiat 9.55535-DS1 / 9.55535-GS1
  • PSA B71 2312

Available packaging

This engine oil is available in various packaging sizes, so you can always choose the right amount for your needs:

  • 1 liter
  • 5 liters
  • 20 liters
  • 60 liters
  • 205 liters

Important considerations

Note: this engine oil is not suitable for Peugeot, Citroën, DS and Opel with PureTech engines. For these engines, the use of MPM 5W30 Premium Synthetic 5W30 ST is recommended.

Technical specifications

  • Density at 15°C: 0.853 kg/l
  • Kinematic viscosity at 40°C: 52.0 mm²/s
  • Kinematic viscosity at 100°C: 9.6 mm²/s
  • Viscosity index: 172
  • Dynamic viscosity at -35°C: 5850 mPa·s
  • Flash point COC: 230 °C
  • Pour point: -48 °C
  • Total Base Number: 6.2 mgKOH/g
  • Sulfated ash: 0.56 mass%

With MPM Engine Oil 0W-30 Premium Synthetic PC, you choose a high-quality engine oil that contributes to optimal performance and efficiency of your vehicle.

Specifications

Reference
MPM 05001PC
EAN
8714293050674
Brand
MPM

Classification, Labelling and Packaging (CLP)

Hazardous to Environment
GHS09
Hazardous to Environment
H412:
Harmful to aquatic life with long lasting effects